NEO V2 PRO GNSS receiver
Neo V2 pro is a GNSS receiver based on UAVCAN communication protocol. It integrates industrial-grade compass, barometer, flight controller status light, buzzer, and safety switch in one. It has the characteristics of high safety and strong anti-interference. .
1.UAVCAN standard protocol, high real-time, strong anti-interference
2.Industrial sensor(RM3100), adapt to complex magnetic field environment
3.High-performance processing unit
4.internal high-precision barometer to meet the needs of different application scenarios.
5.Open source code to load custom programs.
6.Adopt SAW + LNA + SAW dual filtering design, which can effectively avoid the impact of GPS positioning reception from remote control, digital transmission, and 4G signals.
|GNSS receiver||UBLOX Eighth Generation Navigation and Positioning Receiver (M8N)|
|GNSS concurrently||GPS/QZSS L1 C/A,GLONASS L10F ,BeiDou B1I,Galileo E1B/C,SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN|
|Nav. update rate||10HZ(MAX)|
|Nav. update rate||2M|
|Acquisition||Cold start 26s ；Hot start 1s；Aided start 2s|
|Sensitivity||Tracking and nav. -167dBM；Cold start Hot star -148dBM；Reacquisition -160dBM|
|Support Flight control type||Ardupilot/PX4*|
Connect to v5 +
- Please connect it to the flight control CAN1 / CAN2 interface (CAN1 is recommended)
The connection of other PIX flight controllers is the same.
you need to set flight control parameters to enable Neo V2 pro; there are different setting methods according to the flight control firmware.
Set the following parameters in all parameter tables of Mission planner and restart after writing
CAN_P1_DRIVERset to 1.
CAN_P2_DRIVERset to 1.
NTF_LED_TYPESset to 231.
GPS_TYPEset to 9.