Telelink
Telelink is a smart drone remote control that integrates screen, data transmission, image transmission, and remote control, developed by CUAV® and Big Fish® Semiconductor; it is equipped with 1080 and 600 nits high-brightness display. At the same time, it integrates 20km digital transmission and image transmission, and runs Android system and QGoundcontrol ground station, which can be used in plant protection, aerial photography, inspection, scientific research and other fields.
Datesheet
| Item | |
|---|---|
| Processor | Pinecone S1 |
| Transmission | FCC 20KM；CE/SRRC 12KM |
| Latency | minimum 70ms(Does not include delays caused by input sources) |
| Video Resolution | 720p@30fps；1080p@30/60fps |
| Operating Frequency | 2.4GHZ ISM |
| Reconnect | Below 1s |
| Bandwidth | 20Mhz/10Mhz |
| Remote unit feature | |
| Shell | Plastic |
| Screen | 5.46inches；1080P；16 million colors；LCD screen |
| Audio | Internal speaker*1；Internal microphone*2 |
| OS | Android7.0 |
| Language | Chinese、English and more |
| Software | QGroundcontrol（Support multiple languages） |
| Storage | LPDDR3 (2G)；eMMC5.0(8G) |
| Remote control | button keys*4、joysticks*2、 scroll wheel * 1、 back light top key*1 |
| Modem | BT/WIFI(Only supports 5.8G)/GPS |
| Status light | Top tricolor light \ * 2 |
| interface | Microusb*1、TFlash*1(Supports up to 64g of extended storage） |
| Antenna | Directional antenna（4.5dBi)*1；Sectional Antenna（2dBi)*1 ；internal wifi Antenna/internal GPS antenna |
| Battery | Internal 4950mah lipo battery |
| Charge | 5V / 2A charging (Micro USB ) |
| Receiver sensitivity | -99dB@20MHZ |
| Power consumption | Average below 4w（Only transmission system works; medium brightness; GPS close; Bluetooth close; WIFIclose） |
| size | 217*106.5*31mm |
| weight | 516g |
| Air unit feature | |
| Shell | Aviation aluminum |
| Storage | LPDDR3 (1G)、eMMC5.0(4G) |
| interface | Micro HDMI*2、Power*1、UART*1、SBUS*1(BUS1 and SBUS2）、Micro USB*1、Button Key*1、MMCX Antenna*2 |
| Micro HDMI | Video source input interface, connect to camera |
| Micro USB | Debug and upgrade, support OTG mode |
| Pair/Reset Button | pair and state reset |
| MMCX Antenna | Remote unit and Air unit communication |
| SBUS（SM04B-GHS-DC） | SBUS1 can control flight control; SBUS2 can control camera and gimbal |
| Power（SM02B-GHS-DC） | Support 5V ~ 12V |
| UART(SM03B-GHS-DC) | Flight control data input interface |
| Power consumption | Below 4W |
| Receiver sensitivity | -99dB@20MHZ |
| size | 78.5*30*15mm |
| weight | 48g |
Purchase
Hardware connection
Take cuav V5 + for example:
Ana1 and ana2 connect antenna; hdmi1 or hmid2 connect camera
Power is connected to 5V ~ 12V power supply (the current is about 1.5A under 5V voltage; cuav V5 + Telem interface supports 2.5A current, so it can be powered from flight control)
UART to telem1 / telem2 interface of flight control
The SBUs interface is connected to the flight control SBUs / RSSI / DSM interface (part of the flight control interface is identified as RCIN)
Remote unit button
