CAN PDB version update

2.9C

  • Adjust the Core shading screen printing position
  • Add support for 5V PWM, add K1 switch, when the status is on, M1-M8 output 5V PWM
  • Servo voltage setting modified to JP3 and JP4

2.8

  • Adjusted the position of the servo voltage switching pins (JP1/JP2/JP3)

2.6C

  • Modify the board size to 1010.8cm, the original size is 1012cm
  • Change the BEC chip solution to improve BEC load capacity.
  • Added support for servo power supply, and the Servo out output voltage can be adjusted through JP1/JP2/JP3.

results matching ""

    No results matching ""