C-RTK2 HP Positioning and Heading Module
C-RTK2 HP is a full-constellation satellite multi-frequency positioning and heading module independently developed by CUAV. Integrated dual-antenna heading system, one module can realize GPS heading. It makes it easy for UAVs to have application scenarios in complex magnetic field environments such as power line inspections and metal ore inspections. It supports full-system full-band GNSS receivers and provides powerful satellite positioning capabilities. In RTK state, you can get 50+ satellite positioning services and centimeter-level high-precision positioning. C-RTK2 HP also supports UART and DroneCAN dual communication interfaces. DroneCAN can guarantee higher security and stronger anti-interference for data communication, while UART interface can guarantee compatibility with other non-CAN devices.
C-RTK2 HP is ideal for high precision positioning and heading, especially for unmanned system applications.
NOTE
C-RTK2 HP supports ArduPilot 4.4.0 and above firmware
Features
- Full constellation multi-frequency GNSS satellite receiver
- Single module dual antenna heading system
- RM3100 Industrial Grade Magnetic Compass (for safety redundancy)
- Safe and reliable DroneCAN protocol and better compatible UART interface
- Automatic switching between USB and UART
- AP Periph Open Source Firmware, Worry-free custom development
Datasheet
| Hardware parameters | |
|---|---|
| MCU | STM32F4 |
| Compass | RM3100 |
| Receiver | High precision GNSS SoC |
| GNSS | BDS/GPS/GLONASS/Galileo/QZSS |
| Antenna 1 (Master) | BDS: B1I, B2I, B3I GPS: L1C/A, L2P/L2C, L5 GLONASS: L1, L2 Galileo: E1, E5a, E5b QZSS: L1, L2, L5 |
| Antenna 2 (Slave) | BDS: B1I, B2I, B3I GPS: L1C/A, L2C GLONASS: L1, L2 Galileo: E1, E5b QZSS: L1, L2 |
| Position accuracy (RMS) | Single Point: 1.5m(Horizontal)/2.5m (Vertical) DGPS: 0.4m+1PPM (Horizontal/0.8m+1PPM (Vertical) RTK: 0.8cm+1PPM (Horizontal)/1.5cm+1PPM (Vertical) |
| Acquisition | Cold starts<30S Initialization time<5s |
| Data update rate | Up to 20 Hz (default: 5 Hz) |
| Differential data | RTCM3.X |
| Data protocol | DroneCAN/NMEA |
| Port | Antenna*2, CAN*1, UART*1, DSU*1, USB*1 |
| Operating Voltage | 4.7~5.2 V |
| Operating temperature | -20~85 °C |
| Size | 50×37×17 mm |
| Weight | 40g |
Purchase
Pinouts
GNSS performance comparison
| | u-blox F9P-15B | High precision GNSS SOC (C-RTK2 HP)| | :--- | |:---| | Channel|184|1408| | GNSS|Four-star multi-frequency|Full constellation multi-frequency| |GNSS frequency band|L1/L5/G1/G2
B1I/B2I/E1b/E5b|L1/L2/L5/G1/G2
B1/B2/B3I/E1/E5a/E5b| |Heading|√ (two module)|√ (one module)| |Antenna|1|2| |RTK accuracy|1cm+1PPM|0.8cm+1PPM|