Use Tutorial
Pinouts

Hardware Connection

- PixHack series: plug into the controller's Radio port.
- V5+ / V5 Nano / X7 / X25 series: use the dedicated cable to connect the controller's TELEM1/TELEM2 port to the radio's Data port.
Power Supply
TX peak current is 2 A. Provide an input current above 2.5 A and use a separate supply for the USB side; a V5+ controller can power the radio directly.
Connecting to Mission Planner
After connecting the hardware, select the radio's port, set the baud rate to 57600, then click Connect.

Connecting to LGC/QGC
After connecting the hardware, open the LGC ground station; it searches for the device and connects automatically.
If it does not connect automatically, click the LGC icon > Application Settings > Communication Connection, then select an existing link port and click Connect, or create a new connection. When creating a new connection, select serial (USB), choose the port for the radio, and set the baud rate to 57600.
Open the QGroundControl ground station; it connects automatically once the port is detected.

