P9 Radio
The P9 Radio is a long-range data link module from CUAV that carries data and control commands between the unmanned system and the terminal. It operates in the 902–928 MHz band with frequency hopping and provides a reference range of 40 km (ground-to-air, unobstructed suburban area); it supports 12–60 V wide-voltage input to meet the communication needs of a wide range of applications.

Key Features
- 902 ~ 928 MHz operating frequency band
- 40 km transmission range
- 276 kbps transmission rate
- 3 ~ 12S wide-voltage input
- Air and ground units are interchangeable, reducing overall cost
Specifications
| Specifications | |
|---|---|
| Operating frequency | 902–928 MHz |
| Transmission technology | Frequency Hopping |
| Transfer protocol | Transparent transmission |
| Forward error correction | Hamming, BCH, Golay, Reed-Solomon |
| Error detection | 32-bit CRC, ARQ |
| Encryption | Optional AES (custom) |
| Range | Reference distance: 40 km (ground-to-air, unobstructed suburban area) (Transmission distance varies with the environment and configuration; refer to actual use) |
| Sensitivity | -110 dBm @ 115.2 kbps -108 dBm @ 172.8 kbps -107 dBm @ 230.4 kbps |
| Output power | 100 mW–1 W (20–30 dBm), 1 W by default |
| Serial interface | 3.3 V CMOS TTL |
| Antenna gain | 5 dBi |
| Serial baud rate | Up to 230.4 kbps, 57600 by default |
| Air data rate | 115–276 kbps |
| Operating modes | Auto Routing, Store and Forward, Self Healing, Packet Routing |
| Supply voltage | 12–60 V |
| Current consumption | Sleep < 1 mA Idle < 3.5 mA RX 35–80 mA TX 800–1200 mA |
| Interfaces | Serial: GHR-06V-S Antenna: SMA inner pin USB: Type-C Power: TX30PW-M |
| Operating temperature | -40 ~ +85 ℃ |
| Humidity | 5% ~ 95% (non-condensing) |
| Weight | Module 55 g, antenna 31 g (86 g total) |
| Dimensions | 65 × 40 × 16.5 mm |

