Configuration Guide
Factory settings
The SX Radio is shipped with an air data rate of 115K, an interface rate of 57600 and point-to-point broadcast mode; no configuration is normally required. Generally, only the VID needs to be changed to isolate it from other modules.
X-CTU Configuration
The SX Radio is configured with the X-CTU software. Please read the configuration guide before proceeding.
Warning
Do not select the wrong model when configuring. Read the current configuration first, then modify it. Selecting the wrong model or writing the wrong configuration will brick the module.
Software Download
Use with Other Systems
If used only as a wireless telemetry module, connect it to the system according to the pinouts (RX–TX, TX–RX, GND–GND).
The default standard interface rate is 57600; the interface baud rate can be changed as needed.

