HV PM(High voltage power module)

The V5 series Controller kit includes the HV PM module. The following mainly describes how to set and use the HV_PM(high voltage power module).

Overview:

The CUAV HV_PM module is a new high voltage voltage power module independently developed by CUAV^® with the following features:

• Higher voltage input: 10v-60v (3s~14s battery)
• More accurate battery monitor: voltage detection accuracy: +-0.1v; current detection accuracy: +-0.2A
• Bec (5v) max current: 5A
• Max (detection) current: 60A
• Maximum output current(ESC/MOTOR PORT): 60A

Setup through Mission Planner

• Monitor: Anglog Voltage and Current
• Sensor: CUAV HV PM
• APM Ver: CUAV v5 or APM1 (V5 series flight control selects CUAV v5)
• Click on other interface to write parameters
• Restart mp ground station and flight control

Setup through QGroundcontrol

• Number of Cells :According to your battery to settings.
• Full voltage: The voltage of each section, the lithium battery is generally 4.2v
• Empty voltage: LiPo batteries are generally 3.7v, depending on the battery.
• Voltage divider: 18
• A/V: 24